B00C5:11, B00C5:12, B00C5:13 and B00C5:1D
Refer to OEM Wiring Diagrams - SUPPLEMENTAL RESTRAINT SYSTEM for schematic and connector information.
The RCM monitors the passenger seat track position sensor circuits for the following faults:
- Open circuit
- Short to voltage
- Short to ground
- Current out of range
- Faulted passenger seat track position sensor
If a fault is detected, the RCM stores DTC B00C5:11, B00C5:12, B00C5:13 or B00C5:1D in memory and sends a message to the IPC to illuminate the air bag warning indicator.
DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B00C5:11 | Passenger Seat Track Position Restraints Sensor: Circuit Short to Ground | A fault is indicated when the RCM senses a short to ground on the passenger seat track position sensor circuit. |
| B00C5:12 | Passenger Seat Track Position Restraints Sensor: Circuit Short to Battery | A fault is indicated when the RCM senses a short to voltage on the passenger seat track position sensor circuit. |
| B00C5:13 | Passenger Seat Track Position Restraints Sensor: Circuit Open | A fault is indicated when the RCM senses an open on either passenger seat track position sensor circuit. |
| B00C5:1D | Passenger Seat Track Position Restraints Sensor: Circuit Current Out of Range | A fault is indicated when the RCM senses current out of an acceptable range on the passenger seat track position sensor circuit. |