LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission (6F35) -- Explorer) >> Diagnosis And Testing >> Automatic Transmission >> Symptom Chart

Symptom Chart

WARNING: This page is about a different variant/trim than selected.

Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to DIAGNOSTIC METHODS for information about these practices.

In most circumstances, the TCM  sets DTCs to help guide with diagnostics. Refer to the DTC CHART  before using the symptom chart. The Condition column lists the vehicle condition. The Possible Sources column lists a detailed vehicle condition. The Action to column lists the action to be performed to determine the cause of the condition. Each action lists the components that can cause the system and the individual components in that system. The components are listed in order of disassembly. Use the list of components and the required action to focus on disassembly inspections for the root cause of the concern.

SYMPTOM CHART

Condition Possible Sources Action
  • Engagement Concerns
  • No Forward
  • No Reverse
  • Harsh Reverse
  • Harsh Forward
  • Delayed/Soft Reverse
8
  • Delayed/Soft Forward
  • No Forward and No Reverse
  • Delayed/Soft Forward and Reverse
  • INSPECT filter or pump assembly
  • Neutral after Launch
  • Low One Way Clutch.
  • Shift Concerns
  • No 1-2 Shift / Harsh / Soft/Slipping
  • No 2-3 Shift / Harsh / Soft/Slipping
  • No 3-4 Shift / Harsh / Soft/Slipping
  • No 4-5 Shift / Harsh / Soft/Slipping
  • No 5-6 Shift / Harsh / Soft/Slipping
  • Only Gears 1, 2, 3, 4 available
  • Only Gears 3 and 5 available
  • Only Gears 2 and 6 available
  • Only Gears 4, 5, 6 available
  • Only Gears 1 and R available
  • No Engine Braking in Low
  • Torque Converter Operation Concerns
  • No Apply
  • INSPECT the torque converter hydraulic circuits and regulator valve for damage or wear. REFER to HYDRAULIC SYSTEM - 6F35 .
  • Always Applied (engine stalls)
  • INSPECT the torque converter hydraulic circuits and regulator valve for damage or wear. REFER to HYDRAULIC SYSTEM - 6F35 .
  • Cycling/Shutter/Chatter
  • Other Concerns
  • Selector Lever High Effort
  • External Leaks
  • Noise
  • Vibration
  • No Park Range
  • Overheating