LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 96 (Body System - Full Frame And Body Mounting) >> Removal And Installation >> Trailer Hitch

Trailer Hitch

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exploded View Of Trailer Hitch With Torque Specifications
G06780894Courtesy of FORD MOTOR CO.
Item Part Number Description
1 W505261 Trailer hitch electrical connector mounting bolts (2 required)
2 W708772 Trailer hitch mounting bolts (8 required)
3 W709318 Trailer hitch nut plates (4 required)
4 17D826 Trailer hitch
  1. Remove the 2 bolts from the trailer hitch electrical connector bracket mounting bolts and position the bracket aside.
    • To install, tighten to 23 Nm (17 lb-ft).
      Fig 2: Locating Trailer Hitch Electrical Connector Bracket Mounting Bolts
      G06780895Courtesy of FORD MOTOR CO.
  2. NOTE: The aid of an assistant is required to remove the trailer hitch.

    Remove the 8 trailer hitch mounting bolts (4 each side) and remove the trailer hitch.

    • To install, tighten to 275 Nm (203 lb-ft).
      Fig 3: Locating Trailer Hitch Mounting Bolts
      G06780896Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.