Component List
WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
The high-pressure fuel system components consist of the following:
- high-pressure fuel injection pump mounted at the front of the engine block valley.
- high-pressure fuel rails mounted to each valve cover.
- piezo-actuated fuel injectors installed in the cylinder heads.
- fuel pressure control valve mounted to the rear of the LH fuel rail.
- fuel volume control valve mounted to the top of the high-pressure fuel injection pump.
- Fuel Rail Pressure (FRP) sensor mounted to the front of the LH fuel rail.
- secondary fuel filter mounted to the LH valve cover (low pressure).
- fuel injection pump supply tube routed from the secondary fuel filter to the high-pressure fuel injection pump (low pressure).
- fuel rail supply tubes routed from the high-pressure fuel injection pump to the fuel rails.
- fuel injector supply tubes routed from the high-pressure fuel rails to individual injectors.
- fuel injector return hose attached to each fuel injector and the secondary fuel filter.