Throttle Body: Removal
WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty and 2013 Ford F-450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the Air Cleaner (ACL) outlet tube. For additional information, refer to INTAKE AIR DISTRIBUTION & FILTERING .
- Disconnect the Electronic Throttle Control (ETC) electrical connector.
- Disconnect the Throttle Position (TP) sensor electrical connector.
- Remove the 4 bolts and the TB assembly.
- Discard the TB O-ring seal.