LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Engine Controls - Description & Operation (Diesel)) >> On Board Diagnostics (OBD) Monitors >> OBD II

OBD II

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

The California OBD II applies to all California and Clean Air Act States for gasoline engine vehicles up to 14,000 lbs. gross vehicle weight rating (GVWR) starting in the 1996 model year and all diesel engine vehicles up to 14,000 lbs. GVWR starting in the 1997 model year.

The Clean Air Act States have adopted and placed into effect the California Air Resources Board (CARB) regulations for a vehicle class or classes in accordance with the Clean Air Act. Currently the Clean Air Act States are California, Connecticut, Delaware, Maine, Maryland, Massachusetts, New Jersey, New Mexico, New York, Oregon, Pennsylvania, Rhode Island, Vermont and Washington. These States receive California certified vehicles for passenger cars and light trucks, and medium-duty vehicles, up to 14,000 lbs. GVWR.

The Federal OBD applies to all gasoline engine vehicles up to 8,500 lbs. GVWR starting in the 1996 model year and all diesel engine vehicles up to 8,500 lbs. GVWR starting in the 1997 model year. the US Federal only OBD certified vehicles may use the US Federal allowance to certify to California OBD II but then turn off or disable 0.020 evap leak detection.

Starting in the 2004 model year, Federal vehicles over 8,500 lbs. are required to phase in OBD II, and gasoline fueled medium duty passenger vehicles are required to have OBD II. By the 2006 model year, all Federal vehicles from 8,500 to 14,000 lbs. GVWR will have been phased into OBD II.