Reductant Tank Filler Hose: Installation

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

Outboard Frame Mounted Reductant Tank

NOTE: On some chassis cab vehicles, the outboard frame mounted reductant tank can be mounted on the inboard side of the frame rail.

Connect the 2 reductant tank filler hoses to the reductant tank.

Fig 1: Locating Reductant Tank Filler Hoses
Courtesy of FORD MOTOR CO.

Inboard Frame Mounted Reductant Tank
Connect the 2 reductant tank filler hoses to the reductant tank.

Fig 2: Locating Reductant Tank Filler Hoses
Courtesy of FORD MOTOR CO.
Raise the reductant tank into the vehicle.
Loosely the 3 reductant tank bolts.

Fig 3: Locating Reductant Tank Bolts
Courtesy of FORD MOTOR CO.
Install the reductant tank bolt.
- Tighten to 20 Nm (177 lb-in).
  
  Fig 4: Locating Reductant Tank Bolt
  Courtesy of FORD MOTOR CO.
Tighten the 3 reductant tank bolts.
- Tighten to 20 Nm (177 lb-in).
  
  Fig 5: Locating Reductant Tank Bolts
  Courtesy of FORD MOTOR CO.
If equipped, install the fuel tank shield. For additional information, refer to Fuel Tank and Filler Pipe - Exploded View in FUEL TANK AND LINES - GASOLINE AND DIESEL .
All Vehicles
NOTE: Inboard frame mounted reductant tank filler hose shown below, outboard similar.

Install the 3 reductant tank filler hose bolts.

Fig 6: Locating Reductant Tank Filler Hose Bolts
Courtesy of FORD MOTOR CO.
NOTE: Inboard frame mounted reductant tank filler hose shown below, outboard similar.

Attach the reductant tank filler hose cap retaining strap to the reductant tank filler hose.

Fig 7: Locating Reductant Tank Filler Hose Cap Retaining Strap
Courtesy of FORD MOTOR CO.
NOTE: Always refill the reductant tank with new reductant to avoid reductant system contamination.

Fill the reductant tank.