LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Engine Controls - Diagnostic Methods (Diesel)) >> Intermittent Diagnostic Techniques >> Recreating The Fault

Recreating The Fault

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

Recreating the fault is the first step in isolating the cause of the intermittent symptom. If freeze frame data is available, it may help in recreating the conditions at the time of a malfunction indicator lamp (MIL) DTC. Listed below are some of the conditions for recreating the fault.

CONDITIONS TO RECREATE FAULT

Engine Type Conditions Non-Engine Type Conditions
Engine Temperature Ambient Temperature
Engine RPM Moisture Conditions
Engine Load
Engine Idle/Accel/Decel		 Road Conditions (Smooth, Bumpy)
scientia non olet · About LEMON Manuals