LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Supplemental Restraint System) >> Removal And Installation >> Driver Airbag >> Installation

Driver Airbag: Installation

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the horn switch and driver air bag module electrical connectors.
  2. Position the driver air bag module to the steering wheel.
  3. Firmly press in on the driver air bag module to engage the 3 driver air bag module wire clips to the steering wheel.
  4. Repower the SRS. For additional information, refer to SUPPLEMENTAL RESTRAINT SYSTEM (SRS) DEPOWERING AND REPOWERING  in the General Procedures portion.
  5. Install the steering column shroud. For additional information, refer to STEERING COLUMN .
scientia non olet · About LEMON Manuals