LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Seat System - Seats) >> Removal And Installation >> Seat Backrest Heater Mat - Rear >> Removal

Seat Backrest Heater Mat - Rear: Removal

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Before beginning any service procedure in this article, refer to Safety Warnings in SERVICE INFORMATION . Failure to follow this instruction may result in serious personal injury.
NOTE: 60 percent shown, 40 percent similar.
NOTE: Removal steps in this procedure may contain installation details.
  1. Remove the seat. Seat - Rear, Crew Cab
  2. Remove the head restraint guide sleeve(s). Head Restraint Guide Sleeve
    • Tighten to 10 Nm (89 lb-in)
      G08596228
  3. G08596229
  4. NOTE: Use care when separating the seat cushion trim cover from the hook-and-loop strips or the hook-and-loop strips may be torn from the seat cushion foam pad.
    G08596230
  5. G08596231
  6. NOTE: Do not reuse the heater mat or the cushion foam.
    NOTE: Follow the unique instructions or graphic for this step in installation/assembly
    G08596232