With Memory Feature

When the RKE transmitter is activated, a Medium Speed Controller Area Network (MS-CAN) message is sent to the DSM. If the memory SET switch is pressed, the DSM senses continuity to ground through the switch. In either case, the DSM sends a message over the MS-CAN bus to the BCM, which acts as a gateway module and sends a message over the High Speed Controller Area Network (HS-CAN) bus to the SCCM. The SCCM then sends voltage to the adjustable pedal motor. When voltage is applied, the adjustable pedal motor spins a cable that is attached to the adjustable brake pedal. As the cable spins, the pedals move either forward (away from the driver) or rearward (toward the driver) depending on how the switch is pressed and/or current pedal position.