LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Exterior Lighting System) >> Removal And Installation >> Stoplamp Switch

Stoplamp Switch

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Stoplamp Switch With Electrical Connector
G07485168Courtesy of FORD MOTOR CO.
Item Part Number Description
1 - Stoplamp switch electrical connector (part of 14A005)
2 13480-A Stoplamp switch
NOTE: Do not press or pull on the brake pedal when installing or removing the stoplamp switch, otherwise misadjustment or damage to the stoplamp switch can occur.
  1. Disconnect the stoplamp switch electrical connector.
  2. Rotate the stoplamp switch clockwise approximately one-eighth turn to remove the stoplamp switch.
  3. To install, reverse the removal procedure.