LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Information Center - Instrumentation, Message Center, And Warning Chimes) >> General Procedures >> Compass Zone Adjustment

Compass Zone Adjustment

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Determine which magnetic zone you are in for your geographic location.
    Fig 1: Compass Calibration Zone Map
    G06076691Courtesy of FORD MOTOR CO.
  2. Access the message center main menu screen. Using the up and down arrow buttons scroll and select the Settings tab. Press the OK button.
  3. Using the up and down arrow buttons scroll and select the Vehicle tab. Press the OK button.
  4. Using the up and down arrow buttons scroll and select the Compass tab. Press the OK button.
  5. Using the up and down arrow buttons scroll and select the Zone Setting tab. Press the OK button.
  6. Using the up and down arrow buttons choose the appropriate zone for your location from list of zones available. Press the OK button. A message will appear confirming the zone setting. To exit use the left arrow to navigate back to the main menu.
scientia non olet · About LEMON Manuals