LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Information Center - Instrumentation, Message Center, And Warning Chimes) >> General Procedures >> Belt-Minder® Deactivating/Activating >> Preparation

Belt-Minder® Deactivating/Activating: Preparation

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The Belt-minder® can also be deactivated/activated using a scan tool.
  1. Before deactivating/activating the Belt-Minder®, apply the parking brake.
  2. Place the gearshift in the PARK (P) position (automatic transmission) or the NEUTRAL (N) position (manual transmission).
  3. Place the ignition switch in the OFF position.
  4. Close all the vehicle doors.
  5. Unbuckle the driver and passenger safety belts.
  6. Place the headlamp switch in the OFF position.
scientia non olet · About LEMON Manuals