LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Front Suspension (RWD)) >> Removal And Installation >> Wheel Studs - Single Rear Wheel (SRW) >> Removal

Wheel Studs - Single Rear Wheel (SRW): Removal

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel hub and brake disc assembly. For additional information, refer to WHEEL BEARING AND WHEEL HUB - F-250, F-350 .
  2. Using a suitable press, remove and discard the wheel stud.
    Fig 1: Removing Wheel Stud Using Suitable Press
    G06181434Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals