LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Suspension System - General Information) >> Description And Operation >> Wheel Alignment Angles >> Camber >> Negative and Positive Camber

Negative and Positive Camber

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Negative And Positive Camber Angle
G06064836Courtesy of FORD MOTOR CO.

Camber is the vertical tilt of the wheel when viewed from the front. Camber can be positive or negative and has a direct effect on tire wear.

Camber split = LH camber - RH camber.

scientia non olet · About LEMON Manuals