LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Engine Controls - Description & Operation (Except Diesel & Hybrid)) >> On Board Diagnostics (OBD) Monitors >> OBD I, OBD II And Engine Manufacturer Diagnostics (EMD) Overview >> OBD I Systems

OBD I Systems

WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2013 Lincoln Navigator, 2013 Lincoln MKZ, 2013 Lincoln MKX, 2013 Lincoln MKT, and 2013 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.

OBD I vehicles use the same PCM, controller area network (CAN) serial data communication link, J1962 Data Link Connector, and PCM software as the corresponding OBD II vehicle. The only difference is the possible removal of the rear oxygen sensor(s), fuel tank pressure (FTP) sensor, EVAP canister vent valve, and a different PCM calibration. Starting in the 2006 model year, all Federal vehicles from 8, 500 to 14, 000 lbs. Gross Vehicle Weight Rating (GVWR) will have been phased into OBD II and OBD I systems will no longer be utilized in vehicles up to 14, 000 lbs. GVWR.