Brake Pads

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: It is not required to install new brake pads when the brake discs are machined.

Inspect and measure the thickness of the brake pad friction material. For additional information, refer to SPECIFICATIONS .
- Minor surface cracks do not require pad replacement, however, if there are missing chunks or cracks in the lining through to the backing plate, install new brake pads. For additional information, refer to FRONT DISC BRAKE for front brake pads or REAR DISC BRAKE for rear brake pads.
- If the thickness of the friction material is less than the specified thickness, install new brake pads. For additional information, refer to FRONT DISC BRAKE for front disc brakes or REAR DISC BRAKE for rear disc brakes.
- If the friction material shows taper wear that is not within specifications, install new brake pads and verify the caliper guide pins are functioning correctly. For additional information, refer to BRAKE CALIPER GUIDE PINS .