LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Brake System - General Information) >> General Procedures >> Brake System Inspection >> Brake Booster

Brake Booster

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the brake booster for excessive corrosion or damage. Inspect the vacuum hoses for leaks and kinks.
    • Install a new brake booster if signs of excessive corrosion or damage is found. For additional information, refer to POWER BRAKE ACTUATION .
    • Repair or replace vacuum hoses as necessary.
    • To check for correct brake booster operation, refer to COMPONENT TESTS .
  2. Inspect the Hydro-Boost® brake booster excessive corrosion or damage. Inspect the fluid hoses for leaks and kinks.
    • Install a new Hydro-Boost® brake booster if signs of excessive corrosion or damage is found. For additional information, refer to POWER BRAKE ACTUATION .
    • Repair or replace fluid hoses or connections as necessary.
    • To check for correct Hydro-Boost® brake booster accumulator operation, refer to COMPONENT TESTS .
scientia non olet · About LEMON Manuals