Diagnostic Overview
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
Diagnostics in this service information assumes a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to DIAGNOSTIC METHODS for information about these practices.
Refer to OEM Wiring Diagrams - SUPPLEMENTAL RESTRAINT SYSTEM for schematic and connector information.
NOTE:
DTC
U2300:55 sets in every new RCM
installed until configuration data is successfully received from the BCM
. DO NOT install any new components for this DTC
unless directed to do so in the pinpoint test.