LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Rear Suspension) >> Removal And Installation >> Wheel Studs - Single Rear Wheel (SRW) >> Removal

Wheel Studs - Single Rear Wheel (SRW): Removal

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear wheel hub assembly. For additional information, refer to WHEEL HUBS AND BEARNGS - FULL FLOATING AXLE - DANA .
  2. Using the C-Frame and Screw Assembly, remove and discard the wheel stud.
    Fig 1: Removing Wheel Stud Using C-Frame And Screw Assembly
    G06136801Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals