LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Rear Suspension) >> Removal And Installation >> Wheel Studs - Single Rear Wheel (SRW) >> Installation

Wheel Studs - Single Rear Wheel (SRW): Installation

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the wheel stud in the flange making sure that the serrations are aligned with those made by the original wheel stud.
  2. Using the C-Frame and Screw Assembly, install the wheel stud.
    Fig 1: Installing Wheel Stud Using C-Frame And Screw Assembly
    G06136804Courtesy of FORD MOTOR CO.
  3. Install the rear wheel hub assembly. For additional information, refer to REAR DRIVE AXLE/DIFFERENTIAL - DANA 80 .
scientia non olet · About LEMON Manuals