DTC P1703: Brake Switch Out Of Self-Test Range

WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2013 Lincoln Navigator, 2013 Lincoln MKZ, 2013 Lincoln MKX, 2013 Lincoln MKT, and 2013 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.

DTC P1703: BRAKE SWITCH OUT OF SELF-TEST RANGE

Description:	Indicates that during the key ON engine OFF (KOEO) self-test, the BPP signal was high, or during the key ON engine running (KOER) self-test, the BPP signal did not cycle high and low.
Possible Causes:	BPP circuit open BPP circuit short to ground Concern in modules connected to the BPP circuit Damaged brake switch Incorrectly adjusted brake switch Stoplamp circuits open Stoplamp circuits short to ground
Diagnostic Aids:	Check for correct function of the stoplamps. Using a scan tool, check the brake pedal position PID. The stoplamps and PID should turn ON and OFF with brake pedal activation.
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	GO to PINPOINT TEST FD .