LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 312 (Seat System - Seats-Seating - 3RD Row) >> Removal And Installation >> Seat Control Switch >> Removal

Seat Control Switch: Removal

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a non-marring tool, pry out the switch bezel and remove from the quarter trim panel.
  2. Disconnect the electrical connector, remove the 2 screws and seat control switch.