LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 312 (Seat System - Seats-Seating - 3RD Row) >> Disassembly And Assembly >> Seat Backrest - Manual >> Disassembly

Seat Backrest - Manual: Disassembly

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: For component identification and locations, Refer to SEAT - EXPLODED VIEW .
  1. Remove the affected third row backrest. For additional information, Refer to SEAT BACKREST - MANUAL .
  2. Remove the backrest cover. Refer to SEAT BACKREST COVER - MANUAL .
  3. Remove the backrest foam pad.
  4. Remove the 2 head restraint bolts.
    • To install, tighten to 5 Nm (44 lb-in).
  5. Remove the 2 head restraint nuts and the head restraint.
    • To install, tighten to 24 Nm (18 lb-ft).
scientia non olet · About LEMON Manuals