LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 311 (Body Panel System - Body Closures) >> General Procedures >> Program Power Liftgate Open Height >> General Procedure

General Procedure

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The programmed power liftgate height is retained when the battery is disconnected.
  1. Open the liftgate.
  2. Manually move the liftgate to the desired height.
  3. Press and hold the rear liftgate switch (on the shut face of the liftgate) until a chime is heard, indicating that the new power liftgate maximum open height is successfully programmed.
  4. To change the maximum power liftgate open height, repeat the above procedure.
scientia non olet · About LEMON Manuals