XLT, Limited

• The LH front window control switch supplies operating voltage to both rear passenger window control switches whenever the lock-out switch is in the UNLOCK position.
• When operating the driver or any passenger power window from the LH front window control switch, low current voltage signals are sent to the LH power window motor or corresponding passenger window control switch to move the window up or down.

The RH window control switch contains 2 detent positions for each window switch direction. Activating the switch to the first detent position provides a voltage signal (low current circuit) to the corresponding window motor circuit for the direction desired. Activating the switch to the second detent position provides a voltage signal (low current circuit) to both (up and down) window motor circuits to operate in one-touch up/down mode. The RH power window motor interprets the desired window direction based upon which signal it receives first.