Passenger Window Control Switch - Rear

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

The rear window control switches receive voltage (high current circuit) from the accessory delay relay whenever it is active. For additional information about the accessory delay relay, refer to DELAYED ACCESSORY POWER . The rear window control switches receive voltage (low current circuit) from the LH front window control switch when the lock-out switch is in the UNLOCK position. The rear window control switches each have a dedicated ground circuit.

The rear window control switches contain 2 relays, which when at rest (inactive), provide a ground path to their respective power window motor circuit(s).

When the LH or rear window control switch is activated, the corresponding relay located within the rear window control switch is energized which supplies voltage (high current) to operate the power window motor in the desired direction.