LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 302 (Auxiliary Climate Control) >> Removal And Installation >> Thermostatic Expansion Valve >> Removal

Thermostatic Expansion Valve: Removal

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Recover the refrigerant. For additional information, REFER to AIR CONDITIONING (A/C) SYSTEM RECOVERY, EVACUATION AND CHARGING or REFER to AIR CONDITIONING (A/C) SYSTEM RECOVERY, EVACUATION AND CHARGING .
  2. Remove the LH quarter trim panel. For additional information, REFER to QUARTER TRIM PANEL - WITH INFLATABLE SAFETY BELTS or REFER to QUARTER TRIM PANEL - WITHOUT INFLATABLE SAFETY BELTS .
  3. Remove the auxiliary TXV  fitting nut and disconnect the fitting.
    1. To install, tighten to 15 Nm (133 lb-in).
    2. Discard the O-ring seals.
  4. Remove the 2 auxiliary TXV  bolts and the auxiliary TXV  .
    1. To install, tighten to 8 Nm (71 lb-in).
    2. Discard the O-ring seals.
scientia non olet · About LEMON Manuals