LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 302 (Auxiliary Climate Control) >> Removal And Installation >> Thermostatic Expansion Valve >> Installation

Thermostatic Expansion Valve: Installation

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
    1. Install new O-ring seals.
    2. Add the correct amount of clean Polyalkylene Glycol (PAG) oil to the refrigerant system. REFER to REFRIGERANT OIL ADDING .
scientia non olet · About LEMON Manuals