Transmission Fluid Cooler Tubes - 3.7L Ti-VCT With Auxiliary Transmission Fluid Cooler: Removal
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Before beginning any service procedure, refer to SAFETY WARNINGS
. Failure to follow this instruction may result in serious personal injury.
- With the vehicle in NEUTRAL, position it on a hoist. REFER to JACKING AND LIFTING , Lifting Points.
- Remove the ACL assembly. REFER to INTAKE AIR SYSTEM COMPONENTS - EXPLODED VIEW .
- Discard the specified component. Follow local disposal regulations.
- Remove the front bumper cover. REFER to BUMPER COVER - FRONT .
- Special Tool(s): Disconnect Tool TOC Line (1/2") 307-569