Auxiliary Transmission Fluid Cooler - Oil to Air, 3.7L Ti-VCT: Removal

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Before beginning any service procedure, refer to SAFETY WARNINGS . Failure to follow this instruction may result in serious personal injury.

With the vehicle in NEUTRAL, position it on a hoist. REFER to JACKING AND LIFTING , Lifting Points.
Remove the front bumper cover. REFER to BUMPER COVER - FRONT .
- To install, tighten to 8 Nm (71 lb-in).