Disarming the Perimeter Alarm
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
The perimeter alarm can be disarmed by:
- pressing the unlock button on a programmed RKE transmitter.
- pressing the liftgate release button on a programmed RKE transmitter.
- using a programmed key to transition the ignition to the RUN mode.
- entering the correct vehicle unlock code on the keyless entry keypad.
The perimeter alarm can be deactivated by pressing the panic button on a RKE transmitter. All of the lamps stop flashing and the horn stops sounding, but the alarm is still armed.