LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 297 (Anti-Theft System - Perimeter) >> Description And Operation >> Anti-Theft - Perimeter, With Intelligent Access (IA) >> System Operation >> Network Message Chart

Network Message Chart

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
BCM NETWORK MESSAGE CHART

Broadcast Message Originating Module Message Purpose
Passive entry control data RFA  module Provide the BCM  with the Intelligent Access (IA) key data. The data contains information such as if an Intelligent Access (IA) key has been detected, how many were detected, and if it is a programmed key.
Passive entry_control code RFA  module Provide the BCM  with RKE  commands such as lock or unlock.
Passive entry_fob number RFA  module Provide the BCM  with which specific programmed Intelligent Access (IA) key was used.
Passive entry_lock request RFA  module Used in conjunction with the Passive entry_lock status message. Provides the BCM  with the input (keyless entry keypad, RKE  transmitter, etc.) that created the lock or unlock request.
Passive entry_lock status RFA  module Provides the BCM  with the status of the last lock or unlock command.
IPC NETWORK MESSAGE CHART

Broadcast Message Originating Module Message Purpose
Perimeter alarm chime request BCM  Used by the IPC  to sound the perimeter alarm chime and display TO STOP ALARM START VEHICLE in the message center.
scientia non olet · About LEMON Manuals