LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 293 (Body System - Uni-Body, SUBFRAME & Mounting System) >> Removal And Installation >> Subframe Bushings >> Installation

Subframe Bushings: Installation

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Assemble the 204-362 to the front subframe with the new subframe bushing.
    Fig 1: Assembling SST (204-362) To Front Subframe With Subframe Bushing
    G06071377Courtesy of FORD MOTOR CO.
  2. Align the subframe bushing to the front subframe.
    1. Align the subframe bushing so that the voids are oriented in the fore-aft position.
      Fig 2: Identifying Bushing To Front Subframe Alignment
      G06071378Courtesy of FORD MOTOR CO.
  3. Press the new subframe bushing into the front subframe.
  4. Install the front subframe. Refer to SUBFRAME - FRONT .
scientia non olet · About LEMON Manuals