LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 293 (Body System - Uni-Body, SUBFRAME & Mounting System) >> Removal And Installation >> Subframe Bushings - Rear Differential, Front >> Removal

Subframe Bushings - Rear Differential, Front: Removal

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: There are 2 Rear Drive Unit (RDU) front bushings in the rear subframe. This procedure shows how to remove one bushing. The procedure for the remaining RDU  bushing is identical.

    Remove the RDU  . REFER to AXLE ASSEMBLY .

  2. NOTE: Make sure the RDU  204-618/2 is positioned with the larger opening toward the bushing to act as the receiver cup.
    NOTE: Make sure the arrow on the RDU  204-616/2 is pointed toward the rear subframe when removing the bushing.

    Assemble the RDU  204-618 and RDU  204-616 to the rear subframe and press out the bushing.

    Fig 1: Assembling SST (RDU204-618 And RDU204-616) To Rear Subframe
    G06071398Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals