Throttle Body: Removal

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Removal steps in this procedure may contain installation details.

With the vehicle in NEUTRAL, position it on a hoist. REFER to JACKING AND LIFTING , Lifting Points.
Remove the CAC intermediate outlet tube and the CAC lower outlet tube. REFER to INTAKE AIR SYSTEM COMPONENTS - EXPLODED VIEW .
- 10 Nm (89 lb-in) in the sequence shown in illustration.
Remove and discard the TB gasket.