Thermostat - 3.5L GTDI: Removal

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Removal steps in this procedure may contain installation details.

Refer to COOLING SYSTEM DRAINING, FILLING AND BLEEDING .
Remove the ACL outlet tube. Refer to INTAKE AIR DISTRIBUTION SYSTEM & INTAKE AIR FILTERING SYSTEM .
- Material: Thread Sealant with PTFE.
- To install, tighten to 10 Nm (89 lb-in).