LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 289 (Engine Cooling System) >> Removal And Installation >> Coolant Inlet Pipe - 3.5L GTDI >> Removal

Coolant Inlet Pipe - 3.5L GTDI: Removal

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the cooling system. Refer to COOLING SYSTEM DRAINING, FILLING AND BLEEDING .
  2. Remove the fuel rails. Refer to FUEL CHARGING AND CONTROLS - 3.5L TI-VCT .
  3. Remove the battery tray. Refer to BATTERY, BATTERY MOUNTING & BATTERY CABLES .
  4. G09087205
  5. G08624890
  6. G08624891
  7. G08624892
  8. G08624893
  9. G08624894
  10. G08624895
  11. G08624896
  12. G08624897
  13. G08624898
scientia non olet · About LEMON Manuals