Block Heater - 3.5L GTDI, 3.5L Ti-VCT, 3.7L Ti-VCT: Removal
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Before beginning any service procedure, refer to SAFETY WARNINGS
. Failure to follow this instruction may result in serious personal injury.
- Drain the cooling system. Refer to COOLING SYSTEM DRAINING, FILLING AND BLEEDING .
- Detach the block heater electrical connector heat shield.
- Disconnect the block heater electrical connector.
- Remove the block heater.