LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 286 (Handles, Locks, Latches And Entry Systems - Without Intelligent Access) >> Removal And Installation >> Liftgate Latch - Manual >> Removal

Liftgate Latch - Manual: Removal

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Before beginning any service procedure in this article, refer to Safety Warnings in SERVICE INFORMATION . Failure to follow this instruction may result in serious personal injury.
  1. Remove the liftgate trim panel. REFER to LIFTGATE TRIM PANEL .
  2. G09091391
    • To install, tighten to 9 Nm (80 lb-in).
      G09091392
  3. If equipped with liftgate lock cylinder release cable.
    G09091393