Ignition Lock Cylinder Housing: Removal
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
- If equipped with Premium Audio, remove the FCDIM. REFER to FRONT CONTROLS/DISPLAY INTERFACE MODULE (FCDIM) .
- If equipped with Premium Plus Audio or Sony Sound, remove the Front Display Interface Module (FDIM). Premium Plus : REFER to FRONT DISPLAY INTERFACE MODULE (FDIM) or Sony Sound REFER to FRONT DISPLAY INTERFACE MODULE (FDIM) .
- Insert a non-marring tool between the ignition lock cylinder bezel and the instrument panel and pry outward.
-
NOTE: Ignition lock cylinder housing shown from behind to show location of tab.
Remove the ignition lock cylinder housing.