LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 286 (Handles, Locks, Latches And Entry Systems - Without Intelligent Access) >> Removal And Installation >> Hood Latch >> Removal

Hood Latch: Removal

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Mark the position of the hood latch prior to removing the hood latch bolts.

    Remove the 2 bolts and position the hood latch aside to gain access to the hood latch release cable. To install, tighten to 11 Nm (97 lb-in).

  2. Disconnect the hood latch release cable and remove the hood latch.
scientia non olet · About LEMON Manuals