LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 286 (Handles, Locks, Latches And Entry Systems - Without Intelligent Access) >> General Procedures >> Stepped Unlock Programming

Stepped Unlock Programming

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the ignition OFF, press and hold the lock and unlock buttons on the RKE  transmitter simultaneously for 4 seconds.
    • The turn signals flash twice to indicate the mode change.
  2. Repeat Step  1 to enable/disable the stepped unlocking feature.
scientia non olet · About LEMON Manuals