LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 285 (Anti-Theft System - Passive Anti-Theft System (Pats), Without Intelligent Access) >> General Procedures >> Passive Anti-Theft System (PATS) Parameter Reset

Passive Anti-Theft System (PATS) Parameter Reset

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the key from OFF to RUN.
  2. From the scan tool, enter TOOLBOX. Select Body>Security>PATS Functions and follow the IDS  onscreen instructions to enter PATS  security access.
  3. NOTE: If the BCM  was replaced, at least 2 keys must be programmed to the BCM  . After completing step 3, leave the scan tool connected and REFER to ERASE ALL KEYS AND PROGRAM TWO KEYS .

    From the scan tool, select "Parameter Reset" and follow the IDS  on-screen instructions.

scientia non olet · About LEMON Manuals