LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 282 (Wiper System & Washer System) >> Removal And Installation >> Wiper and Washer Switch >> Installation

Wiper and Washer Switch: Installation

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the wiper/washer switch onto the SCCM  .
  2. Install and tighten the wiper/washer switch screws.
  3. Install the upper and lower steering column shrouds. REFER to STEERING COLUMN SHROUD .
scientia non olet · About LEMON Manuals