LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 282 (Wiper System & Washer System) >> General Procedures >> Wiper Blade and Pivot Arm Adjustment - Windshield >> General Procedure

General Procedure

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Cycle and park the windshield wipers.
  2. Verify the RH and LH windshield wiper blades are located at the alignment marks on the windshield glass.
    Fig 1: Identifying Windshield Glass Alignment Marks
    G06271581Courtesy of FORD MOTOR CO.
  3. NOTE: Make sure that there is no mechanical binding in the linkage preventing the wiper arms from returning to the fully parked position.

    If necessary, remove the windshield wiper pivot arms and reposition them to the alignment marks on the windshield glass. Refer to WIPER PIVOT ARM - FRONT .