LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Fuel Tank & Fuel Lines) >> Disassembly And Assembly >> Fuel Conditioning Module - 6.7L Diesel >> Disassembly

Fuel Conditioning Module - 6.7L Diesel: Disassembly

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the drain plug.
  2. Remove the water-in-fuel sensor.
  3. NOTE: Depending on the amount of the O-ring seal swelling, removal of the fuel filter cover may be noisy and require some effort.

    Remove the fuel filter cover.

    • Remove the O-ring seal from the fuel conditioning module housing.
  4. Remove and discard the fuel filter and O-ring.
  5. Remove the 2 bolts, the 2 spacers and the fuel conditioning module housing.
scientia non olet · About LEMON Manuals