LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 275 (Four Wheel Drive (4WD) Systems) >> Removal And Installation >> All Wheel Drive (AWD) Relay Module >> Removal

All Wheel Drive (AWD) Relay Module: Removal

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the LH quarter trim panel. REFER to QUARTER TRIM PANEL - WITH INFLATABLE SAFETY BELTS , Removal with inflatable safety belts or REFER to QUARTER TRIM PANEL - WITHOUT INFLATABLE SAFETY BELTS , Removal without inflatable safety belts.
  2. Disconnect the AWD  relay module electrical connector.
  3. Remove the 2 pushpins and the AWD  relay module.