LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 274 (Seat System - Seats-Seating - 2ND Row) >> Removal And Installation >> Seat Control Switch >> Removal

Seat Control Switch: Removal

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Pull the quarter trim panel away from the weather strip at the rear door opening.
  2. Squeeze the tabs at the top and bottom of the seat control switch together and push the switch out through the front of the quarter trim panel.
  3. Disconnect and remove the seat control switch.